|
Welcome to HDCOMAV.com: Structured Wiring
|
|
RS-35 Surround Speakers
Conventional surround speakers must be mounted following specific location requirements, making their placement in homes troublesome. The new RS-35 surround speaker features Klipsch's Wide Dispersion Surround Technology™ (WDST) and reproduces ambient and precise localized sounds with unlimited placement flexibility. The RS-35 is a refined version of the RS-3 II, one of the best-selling surrounds in the United States, and delivers improved bass performance and employs a more compact-sized horn for a reduction in cabinet width.
The RS-35 delivers crystal-clear sonic detail through the careful placement of two Tractrix® Horn loaded titanium-dome tweeters and one 6.5-inch Cerametallic™ woofer. By aligning the two horns at 90 degrees with respect to each other, along with the front-firing woofer, the RS-35 smoothly covers a 180-degree horizontal arc, allowing maximum placement flexibility. This unique Wide Dispersion Technology™ brings Reference Series performance to listening areas with less-than-ideal configurations.
|
The woofer features an enhanced version of Klipsch's elegant, copper-colored Cerametallic™ cone that is even stronger than before. This cone goes through an anodizing process to convert its inner and outer surfaces to ceramic. The result is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer's operating range. Driving this cone is a large magnet and high-temperature, long-excursion voice coil, for high efficiency and deep, powerful bass without breakup or distortion. A side port further enhances the speaker's bass output, for a full-range surround-channel experience.
The crossover network is constructed using premium components including top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor all mounted on a high-quality fiberglass epoxy board. This combination ensures signal purity and proper driver integration.
The RS-35 comes in a black or white vinyl finish and has a back-panel keyhole for on-wall mounting and a threaded insert for attachment to popular adjustable wall and ceiling brackets.
RS-35 listeners will experience the full impact of special effects and guitar riffs by hearing every last detail, from a whisper, to a car crash or powerful melody.
|
FREQUENCY RESPONSE:
81Hz-20kHz ±3dB
|
|
|
|
SENSITIVITY:
97dB @ 2.83 volts/1 meter (equivalent sound energy)
|
WOOFER:
K-1126-O 6.5" (16.51cm) Cerametallic® cone / cast polymer frame
|
|
POWER HANDLING:
125 watts maximum continuous (500 watts peak)
|
INPUT CONNECTIONS:
One set of binding post speaker terminals
|
|
NOMINAL IMPEDANCE:
8 ohms compatible
|
DIMENSIONS:
7.7" (19.6cm) x 15.75" (40cm) x 7.7" (19.6cm)
|
|
DRIVE COMPONENTS:
Two-way system using two 1" (2.54cm) neodymium magnet, titanium dome compression driver tweeters with 5" (12.7cm) square 90° x 60° Tractrix® Horns and one 6.5" (16.51cm) aluminum cone woofer
|
WEIGHT:
9.6 lbs. (4.4kg)
|
|
ENCLOSURE TYPE:
Bass reflex via side-mounted port
|
ENCLOSURE MATERIAL:
Medium density fiberboard construction (MDF)
|
|
TWEETER:
Two K-129-DN 1" (2.54cm) Titanium dome compression drivers
|
FINISHES:
Matte-finish Black or White vinyl
|
|
HIGH FREQUENCY HORN:
5" square 90°x60° Tractrix® Horns
|
MOUNTING:
Back panel Keyhole and Threaded Insert
|
|
|
|
|
|
|
|
